The Value Apex provides great storage for all garden equipment at a highly competitive market price. With no windows for extra security 9mm finish overlap cladding, protected with a red cedar water based treatment.

Heavy Duty 28x44mm internal rounded four corner framework provides additional structure and strength. The roof is covered with a heavy duty green mineral felt to ensure the contents of your overlap apex shed will not suffer even during severe weather conditions.

The Value Apex provides great storage for all garden equipment and features no windows for extra security, 10mm finish overlap cladding and is protected with a red cedar water based treatment.

Finally, the front (including door), floor and roof are constructed using our solid 12mm shiplap tongue and groove cladding, making this one of the safest and secure value garden sheds available.

Important
Height at eaves 5ft 4inches with the height of apex increasing with width.

Door must be in the smallest part of the shed (i.e. in a 6×4 the door would be in the 4ft section where the apex is).

All sizes quoted are ROOF and not FLOOR sizes.

For approximate dimensions of your chosen building, please ask for details.

For full details, please see our Terms & Conditions.

Sizing
All building sizes are taken from the roof, the floor is 4 inches smaller i.e. An 8×6 is the roof size and the floor size is 92″ x 68″

Construction
Cladding: 12mm Dip Treated Shiplap Tongue and Groove

Flooring: 12mm Dip Treated Shiplap Tongue and Groove

Roof: 12mm Dip Treated Shiplap Tongue and Groove

Framing: 28x44mm Rounded Four Corner

Glazing: 3mm Toughed Glass – choice of windows (fixed, number depends on size or no windows)

Locking System: Hasp and Staple – option for lock and key available

Door: 30 Inches Width (standard) – option for wide or double doors available

Roof Covering: Polyester Green Mineral Felt

Although timbers on this building have received a factory coat of preserve, they do not prevent water ingress that can occur during rainfall. This is remedied by treating the building with an oil, silicon or PVA based treatment.

Throughout the year timber can appear to have moved and cause daylight to appear through the joints. This is caused by shrinking and expanding due to changes in temperature. Timber is a natural product and prone to changes in appearance, including some movement and the occurrence of small knot holes or splits due to changes in temperatures and weather conditions.

Any splits, knots, warping or similar visual imperfections in the timber will not affect the structural integrity of the product in any way.

None of the above render the product unfit for purpose.

Free delivery is offered to the following postcode prefixes: *L, *PR, FY*, *CH, *WN and *WA1-13 on all garden buildings.

Unless other wise stated, installation of your garden shed or summerhouse is included within the price of your building that is delivered free of charge within our free delivery postcodes.

All garden sheds and summerhouses are screwed together internally when installed – no cheap nails on the outside holding your building together! Our installation service includes the application of roof covering, glazing of windows (if chosen) as well as the building being constructed.

To gain access to your garden, we must be able to walk around the OUTSIDE of your property. We do not carry panels over walls or outbuildings under no circumstances.

It is essential that a firm and level base be in place before installation can take place. This can be concrete, patio paving flag stones, decking or any other solid foundation. Your firm and level base must measure the same size as the building you are ordering (or larger) and the whole area must be covered to ensure the integrity of your buildings floor is not compromised. We will not install a building on grass or soil.

Any garden building that is over 12ft wide – roofs may sometimes not be pre-felted therefore require the installation team to apply this once the building is constructed. This will require an area of 1ft to either side and to the rear of your building being needed by our installation team. If you require further information or clarification, please call our sales office on 0151 922 5282 or email info@merseysidesheds.co.uk

Failure to provide the above, will result in the installation being aborted and the building being flat pack at your property for self-installation. If we are required to revisit due to your solid level base not being suitable, a re-visit fee will be charged. (POA)

It is important to ensure you have clear, unrestricted access from the road to your base at the time of delivery. Most of our buildings require a height clearance of over 6ft. Under no circumstances do we carry over any fences, walls, outbuildings etc. for health and safety reasons.

To gain access to your garden, we must be able to walk around the OUTSIDE of your property. We do not carry panels over walls or outbuildings under no circumstances.

When ordering a garden shed 8×8 or larger (or ANY size summerhouse) it is imperative to ensure you have 8ft height clearance from where our vehicle can park to the base upon installation. Checking that washing lines are removed, door frames are removed from side gates or any arched passages are a minimum of 8ft high.

Failure to provide either of the above at the time of delivery, installation will abort the installation service and the building will be delivered only for the customer to install themselves – or should we be required to revisit to commence installation a fee will be charged.