Mersey Apex Garden Shed

£295.00£1,550.00

The Mersey Apex shed is one of Merseyside Sheds more prominent and popular products. One fundamental reason for it being our bestseller comes from its superior grade 12mm tongue and groove shiplap cladding.

Prices for your Mersey Apex include delivery and fitting.

Clear

Door Options

All doors are 2ft 6inches wide, upgrades available. Please select an option below.

Window Options * 

Please confirm whether you require windows (number depends on size), or no windows.
All windows glazed with 3mm toughened glass. Please select an option below.

Security Options

A choice of extras to improve the security on your building.

Base * 

It is essential that a Firm and Level base be in place before installation can take place – failure to provide this, will result in the installation being aborted with a re-visit charge being required to be paid by the customer should another appointment have to be made for installation to commence. Please confirm below that you have (or will have) a solid and level base prior to delivery and installation. This should ideally be concrete, decking, patio flags or tarmac.
Please note: Bases should measure at least the same size as the building you are ordering, if you are unsure we ask you call our sales office or email us for confirmation on what is suitable for your shed.

Please tick the box below if you would like to upgrade your garden building to come with 58x44mm super strong framing.

Access * 

We do not go through your property.
It is important to ensure you have clear, unrestricted access from the road to your base at the time of delivery. When ordering a building 8×8 or larger it is imperative to ensure you have 8ft height clearance from where our vehicle can park to the base upon installation. If not, call our sales office on 0151 9225282 before placing your order.

SKU: MerseyApex

Description

The Mersey Apex shed is one of Merseyside Sheds more prominent and popular products. One fundamental reason for it being our bestseller comes from its superior grade 12mm tongue and groove shiplap cladding. The cladding, emphasising rigidity and security is protected with a red cedar water based factory treatment. The roof of the Mersey Apex Shed is covered with a polyester backed heavy duty green mineral felt for further protection.

Internally, heavy duty 28x44mm rounded four corner framework provides additional structure and strength to the overall garden shed. The standard width (2ft 6in wide) well braced single access door on the shed’s gable end provides more than sufficient access to store large outdoor products such as barbeques and bicycles. You are able to customise your Mersey Apex, personalising your shed to suit your requirements. Require no windows? opening windows? or even double doors? Make your Mersey Apex work for you!

Important:
Height at eaves 5ft 4inches with the height of apex increasing with width.
Door must be in the smallest part of the shed (i.e. in a 6×4 the door would be in the 4ft section where the apex is). If you require more headroom or an Apex roof with the door on the longest section, please click here.
All sizes quoted are ROOF and not FLOOR sizes.
For approximate dimensions of your chosen building, please ask for details.
For full details, please see our Terms & Conditions.

Additional information

Size

, , , , , , , , , , , , , , , , , , , , , , , ,

Delivery

Free delivery is offered to the following postcode prefixes: *L, *PR, *CH, *WN and *WA1-12 on all garden buildings.

If your postcode is not listed but are interested in finding out about the availability and / or price of a delivery of one of our garden sheds or summerhouses to your home please contact our sales office on 0151 922 5282 for information.

Installation

Unless other wise stated, installation of your garden shed or summerhouse is included within the price of your building that is delivered free of charge within our free delivery postcodes.

All garden sheds and summerhouses are screwed together internally when installed – no cheap nails on the outside holding your building together! Our installation service includes the application of roof covering, glazing of windows (if chosen) as well as the building being constructed.

To gain access to your garden, we must be able to walk around the OUTSIDE of your property. We do not carry panels over walls or outbuildings under no circumstances.

It is essential that a firm and level base be in place before installation can take place. This can be concrete, patio paving flag stones, decking or any other solid foundation. Your firm and level base must measure the same size as the building you are ordering (or larger) and the whole area must be covered to ensure the integrity of your buildings floor is not compromised. We will not install a building on grass or soil.

Any garden building that is over 12ft wide – roofs may sometimes not be pre-felted therefore require the installation team to apply this once the building is constructed. This will require an area of 1ft to either side and to the rear of your building being needed by our installation team. If you require further information or clarification, please call our sales office on 0151 9225282 or email info@merseysidesheds.co.uk

Failure to provide the above, will result in the installation being aborted and the building being flat pack at your property for self-installation. If we are required to revisit due to your solid level base not being suitable, a re-visit fee will be charged. (POA)

Access

It is important to ensure you have clear, unrestricted access from the road to your base at the time of delivery. Most of our buildings require a height clearance of over 6ft. Under no circumstances do we carry over any fences, walls, outbuildings etc. for health and safety reasons.

To gain access to your garden, we must be able to walk around the OUTSIDE of your property. We do not carry panels over walls or outbuildings under no circumstances.

When ordering a garden shed 8×8 or larger (or ANY size summerhouse) it is imperative to ensure you have 8ft height clearance from where our vehicle can park to the base upon installation. Checking that washing lines are removed, door frames are removed from side gates or any arched passages are a minimum of 8ft high.

Failure to provide either of the above at the time of delivery, installation will abort the installation service and the building will be delivered only for the customer to install themselves – or should we be required to revisit to commence installation a fee will be charged.

Specification

Sizing

All building sizes are taken from the roof, the floor is 4 inches smaller i.e. An 8×6 is the roof size and the floor size is 92″ x 68″

Construction

Cladding: 12mm Dip Treated Shiplap Tongue and Groove
Flooring: 12mm Dip Treated Shiplap Tongue and Groove
Roof: 12mm Dip Treated Shiplap Tongue and Groove
Framing: 28x44mm Rounded Four Corner
Glazing: 3mm Toughed Glass – choice of windows (fixed, number depends on size or no windows)
Locking System: Hasp and Staple – option for lock and key available
Door: 30 Inches Width (standard) – option for wide or double doors available
Roof Covering: Polyester Green Mineral Felt

Although timbers on this building have received a factory coat of preserve, they do not prevent water ingress that can occur during rainfall. This is remedied by treating the building with an oil, silicon or PVA based treatment. Throughout the year timber can appear to have moved and cause daylight to appear through the joints. This is caused by shrinking and expanding due to changes in temperature. Timber is a natural product and prone to changes in appearance, including some movement and the occurrence of small knot holes or splits due to changes in temperatures and weather conditions. Any splits, knots, warping or similar visual imperfections in the timber will not affect the structural integrity of the product in any way.
None of the above render the product unfit for purpose.